 |
#110
Plateau Tuning Hammer - Complete Includes one knob, one shaft, one head (15 degrees or
20 degrees)
and choice of #2 or #3 Sole tuning tip. |
$175 |
|
#103
- Hex Hammer Shaft
1/2" x 8" or 10" steel hex hammer shaft,
heat treated One
end is standard 1/8 tapered pipe thread and will
work with Schaff, Yamaha, and Jahn heads. The other
end will only work with the Plateau head. |
$60 |
 |
#115
- 15 degree tuning shaft head
The
plateau head will not work with a standard shaft
but will need the straight pipe thread of the Plateau
shaft. The advantage of the plateau system is that
both shaft and head have a mating Plateau surface
that makes the union of shaft and head stronger
and stiffer. Tips
that worked with the old Mother Goose Tools heads
will work with this head. |
$25 |
|
#125
- 20 degree tuning shaft head
The
plateau head will not work with a standard shaft
but will need the straight pipe thread of the Plateau
shaft. The advantage of the plateau system is that
both shaft and head have a mating Plateau surface
that makes the union of shaft and head stronger
and stiffer. Tips
that worked with the old Mother Goose Tools heads
will work with this head. |
|
 |
#101
- Tuning Hammer Complete (old stock) [until
stock runs out]
Available
with the choice of different size ball ends. |
$150 |
|
#102
- Ball knobs separately
Various
woods
The blue rubber knob in the middle of the photo is
$20. |
|
|
#105
- Sole Tuning Tip
Sole
tuning tips are of German manufacture and are heat
treated.
Specify
#2 or #3 tip. |
|
